One27 SMT-connector Now Available with Last-Mate Contacts
Hot Swapping for Industrial Automation
The One27 with a 1.27 mm pitch is now also available with last-mate contacts. Developers will be able to obtain the angled 12- to 80-pin male connectors starting in March 2020. This enables the trouble-free replacement of a module during operation in industrial applications.
The electronics are reliably protected in this process: A defined sequence of signal, ground, and power contacts is maintained during mating and disconnection. This ensures that the ground ground connection is established first to dissipate ground potential differences or electrostatic charges before the data line is established.
Changes during operation can thus be made quickly and easily. Modules containing the One27 can be removed and replaced without having to power down the device.
The dual-row One27 SMT connector with an angled Male can be customized—last-mate contacts can be placed in any desired position. The connector family offers a wide variety of types and pitch with a small pitch and maximum robustness. The board-to-board distance can be individually set between 8.00 mm and 13.8 mm. The high effective mating length of the One27-connector allows the Male and Female to be mated variably within a range of 1.5 mm. Contacting in the One27 connectors is achieved via a double-lobed female contact that encloses the contact pin of the Male.
For more information, visit www.ept.de/One27
. Please contact our sales department for your desired connector configuration.
Email: Sales@ept.de
Phone number: +49 (0) 8861 2501 0
Back to the product overview.
The electronics are reliably protected in this process: A defined sequence of signal, ground, and power contacts is maintained during mating and disconnection. This ensures that the ground ground connection is established first to dissipate ground potential differences or electrostatic charges before the data line is established.
Changes during operation can thus be made quickly and easily. Modules containing the One27 can be removed and replaced without having to power down the device.
The dual-row One27 SMT connector with an angled Male can be customized—last-mate contacts can be placed in any desired position. The connector family offers a wide variety of types and pitch with a small pitch and maximum robustness. The board-to-board distance can be individually set between 8.00 mm and 13.8 mm. The high effective mating length of the One27-connector allows the Male and Female to be mated variably within a range of 1.5 mm. Contacting in the One27 connectors is achieved via a double-lobed female contact that encloses the contact pin of the Male.
For more information, visit www.ept.de/One27
. Please contact our sales department for your desired connector configuration.
Email: Sales@ept.de
Phone number: +49 (0) 8861 2501 0
Back to the product overview.