Rigid connectors, IEC 61076-4-101, 2 mm pitch
High contact density: The hm2.0 series of hard-metric connectors was developed in accordance with the international standard IEC 61076-4-101. The shielded connector with a 2.0 mm pitch is suitable for applications requiring high contact density and reliability. As a result, the connector system is widely adopted in the backplane sector. Standardization ensures compatibility of the connectors across different manufacturers.
Features
- Wide range of configurations
- Modular connectors with a 2 mm pitch
- 5 or 8 signal rows
- 12 different pin lengths
- Custom pinout available Available
- with or without
- shielding Data transfer rates of up to 3.125 Gbit/s possible
- Rugged design
- Accessories such as shrouds and keying
Applications
- Telecommunications
- Network Systems
- CompactPCI
- Medical Technology
- Industrial PCs (IPC)
hm2.0: Overview
Filter
Slats
hm2.0 Connector Strip, Type A Part No. 244-11000-15
Number of poles: 110, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, unshielded, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type A Part No. 244-11300-15
Number of poles: 110, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type A Part No. 244-11305-15
Number of poles: 90, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type A Part No. 244-11306-15
Number of poles: 90, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 AB25-style connector Part No. 244-61000-15
Number of poles: 125, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, unshielded, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 AB25-style connector Part No. 244-61300-15
Number of poles: 125, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type AB19 Part No. 244-63000-15
Number of poles: 95, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, unshielded, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type AB19 Part No. 244-63300-15
Number of poles: 95, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type AB22 Part No. 244-62000-15
Number of poles: 110, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, unshielded, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type AB22 Part No. 244-62300-15
Number of poles: 110, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type B25 Part No. 244-21000-15
Number of poles: 125, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, unshielded, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type B25 Part No. 244-21300-15
Number of poles: 125, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type B19 Part No. 244-23000-15
Number of poles: 95, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, unshielded, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type B19 Part No. 244-23300-15
Number of poles: 95, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type B22 Part No. 244-22000-15
Number of poles: 110, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, unshielded, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type B22 Part No. 244-22300-15
Number of poles: 110, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type C Part No. 244-31000-15
Number of poles: 55, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, unshielded, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type C Part No. 244-31300-15
Number of poles: 55, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, with shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type D Part No. 246-11000-15
Number of poles: 176, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, Available with or without shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type D Part No. 246-11300-15
Number of poles: 176, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, Available with or without shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 DE-style connector Part No. 246-61000-15
Number of poles: 200, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, Available with or without shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 DE-style connector Part No. 246-61300-15
Number of poles: 200, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, Available with or without shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type E Part No. 246-21000-15
Number of poles: 200, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, Available with or without shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Pin Header, Type E Part No. 246-21300-15
Number of poles: 200, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, Available with or without shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type F Part No. 246-31000-15
Number of poles: 88, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, Available with or without shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Connector Strip, Type F Part No. 246-31300-15
Number of poles: 88, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, Available with or without shielding, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 L-type terminal strip Part No. 244-51000
for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
Power
hm2.0 Pin Header, Type N Part No. 244-52000
for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
Power
hm2.0 Connector Strip, Type A15 Part No. 244-13000-15
Number of poles: 60, Connector length: 2.9 mm, for PCB thickness of at least 1.44 mm, unshielded, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
Blade strips
hm2.0 Terminal Block, Type A Part No. 243-11010-15
Number of poles: 110, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A Part No. 243-11310-15
Number of poles: 154, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A Part No. 243-11322-15
Number of poles: 154, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A Part No. 243-11323-15
Number of poles: 100, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A Part No. 243-11360-15F
Number of poles: 154, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A Part No. 243-11709-15F
Number of poles: 100, Connection length: 16 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A Part No. 243-11710-15F
Number of poles: 154, Connection length: 16 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A Part No. 243-11715-15F
Number of poles: 154, Connection length: 16 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A Part No. 243-11734-15F
Number of poles: 154, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB25 Part No. 243-61010-15
Number of poles: 125, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB25 Part No. 243-61310-15
Total: 169, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB25 Part No. 243-61320-15
Total: 169, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB25 Part No. 243-61360-15F
Total: 169, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB19 Part No. 243-63010-15
Number of poles: 95, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB19 Part No. 243-63310-15
Number of poles: 127, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB19 Part No. 243-63320-15
Number of poles: 127, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB19 Part No. 243-63360-15F
Number of poles: 127, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB22 Part No. 243-62010-15
Number of poles: 110, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB22 Part No. 243-62310-15
Number of poles: 146, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB22 Part No. 243-62320-15
Number of poles: 146, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type AB22 Part No. 243-62360-15F
Number of poles: 146, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B25 Part No. 243-21010-15
Number of poles: 125, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B25 Part No. 243-21020-15
Number of poles: 125, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B25 Part No. 243-21310-15
Number of poles: 175, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B25 Part No. 243-21320-15
Number of poles: 175, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B19 Part No. 243-23310-15
Number of poles: 95, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B19 Part No. 243-23320-15
Number of poles: 133, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B19 Part No. 243-23360-15F
Number of poles: 133, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B19 Part No. 243-23361-15F
Number of poles: 133, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B19 Part No. 243-23371-15F
Number of poles: 133, Connection length: 16 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B19 Part No. 243-23700-15F
Number of poles: 133, Connection length: 16 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B19 Part No. 243-23716-15F
Number of poles: 133, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B22 Part No. 243-22310-15
Number of poles: 154, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B22 Part No. 243-22311-15
Number of poles: 154, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B22 Part No. 243-22312-15
Number of poles: 132, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B22 Part No. 243-22320-15
Number of poles: 154, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B22 Part No. 243-22351-15F
Number of poles: 132, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B22 Part No. 243-22360-15F
Number of poles: 154, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B22 Part No. 243-22361-15F
Number of poles: 154, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B22 Part No. 243-22371-15F
Number of poles: 154, Connection length: 16 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type B22 Part No. 243-22734-15F
Number of poles: 154, Connection length: 14.5 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type C Part No. 243-31010-15
Number of poles: 55, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type C Part No. 243-31020-15
Number of poles: 55, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type C Part No. 243-31310-15
Number of poles: 77, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type C Part No. 243-31320-15
Number of poles: 77, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type D Part No. 245-11010-15
Number of poles: 176, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type D Part No. 245-11310-15
Number of poles: 220, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, DE Type Part No. 245-61010-15
Number of poles: 200, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, DE Type Part No. 245-61310-15
Number of poles: 244, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type E Part No. 245-21010-15
Number of poles: 200, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type E Part No. 245-21310-15
Number of poles: 250, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type F Part No. 245-31010-15
Number of poles: 88, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type F Part No. 245-31310-15
Number of poles: 110, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type L Part No. 243-51000
for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
Power
hm2.0 Terminal Block, Type M Part No. 243-41010-15
Number of poles: 55, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
Power
hm2.0 Terminal Block, Type M Part No. 243-41310-15
Number of poles: 77, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
Power
hm2.0 Terminal Block, Type N Part No. 243-52000
for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
Power
hm2.0 Terminal Block, Type A15 Part No. 243-13010-15
Number of poles: 60, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A15 Part No. 243-13020-15
Number of poles: 60, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A15 Part No. 243-13310-15
Number of poles: 84, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Terminal Block, Type A Part No. 243-11321-15
Number of poles: 154, Connector length: 3.7 mm, for PCB thickness > 2.2 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
Accessories
hm2.0 Encoder Insert Header Part No. 244-8011
for hm-Federleisten, Walnut Brown RAL 8011
Perpendicular
hm2.0 Encoder Insert Header Part No. 244-8012
for hm-Federleisten, Strawberry Red RAL 3018, Telephony Specification
Perpendicular
hm2.0 Encoder Insert Header Part No. 244-8013
for hm-Federleisten, Blue-Lilac RAL 4005
Perpendicular
hm2.0 Encoder Insert Header Part No. 244-8014
for hm-Federleisten, Brilliant Blue RAL 5007, 5.0 V cPCI
Perpendicular
hm2.0 Encoder Insert Header Part No. 244-8021
for hm-Federleisten, Lilac Green RAL 6011
Perpendicular
hm2.0 Encoder Insert Header Part No. 244-8031
for hm-Federleisten, Cadmium Yellow RAL 1021, 3.3 V cPCI
Perpendicular
hm2.0 Encoder Insert Header Part No. 244-8032
for hm-Federleisten, Slate Gray RAL 7015
Perpendicular
hm2.0 Encoder Insert Header Part No. 244-8033
for hm-Federleisten, Steel Blue RAL 5011
Perpendicular
hm2.0 Encoder Insert Header Part No. 244-8034
for hm-Federleisten, Pastel Orange RAL 2003
Perpendicular
hm2.0 Encoder Insert Header Part No. 244-8041
for hm-Federleisten, Ochre Yellow RAL 1024
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8011
for hm-Messerleisten, Walnut Brown RAL 8011
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8012
for hm-Messerleisten, Strawberry Red RAL 3018, Telephony Specification
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8013
for hm-Messerleisten, Blue-Lilac RAL 4005
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8014
for hm-Messerleisten, Brilliant Blue RAL 5007, 5.0 V cPCI
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8021
for hm-Messerleisten, Lilac Green RAL 6011
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8031
for hm-Messerleisten, Cadmium Yellow RAL 1021, 3.3 V cPCI
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8032
for hm-Messerleisten, Slate Gray RAL 7015
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8033
for hm-Messerleisten, Steel Blue RAL 5011
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8034
for hm-Messerleisten, Pastel Orange RAL 2003
Perpendicular
hm2.0 Coding Insert Blade Strip Part No. 243-8041
for hm-Messerleisten, Ochre Yellow RAL 1024
Perpendicular
hm2.0 Lower Shield Plate, Type A Part No. 244-11600-1
22 contacts, Connector length: 3.4 mm, for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 lower shield plate, type B25 Part No. 244-21600-1
25 contacts, Connector length: 3.4 mm, for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 lower shield plate, type B19 Part No. 244-23600-1
19 contacts, Connector length: 3.4 mm, for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 lower shield plate, type B22 Part No. 244-22600-1
22 contacts, Connector length: 3.4 mm, for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 lower shield plate, Type C Part No. 244-31600-1
11 contacts, Connector length: 3.4 mm, for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 lower shield plate, Type D Part No. 246-11600-1
22 contacts, Connector length: 3.4 mm, for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 lower shield plate, Type E Part No. 246-21600-1
25 contacts, Connector length: 3.4 mm, for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 lower shield plate, Type F Part No. 246-31600-1
11 contacts, Connector length: 3.4 mm, for PCB thickness of at least 1.44 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Press-fit
hm2.0 Shroud A Part No. 243-5525-1/1
for PCB thicknesses of 3.2–4.0 mm, x = 4.5 mm, y = 14.95 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud A Part No. 243-5525-2/1
for PCB thicknesses of 4.0–4.8 mm, x = 3.7 mm, y = 14.15 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud A Part No. 243-5525-3/1
for PCB thickness > 4.8 mm, x = 2.9 mm, y = 13.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud A Part No. 243-5525-4/1
for PCB thicknesses of 2.4–3.2 mm, x = 4.9 mm, y = 15.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud A Part No. 243-5525-5/1
for PCB thickness < 2.4 mm, x = 6.3 mm, y = 16.75 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB19 Part No. 243-5719-1/1
for PCB thicknesses of 3.2–4.0 mm, x = 4.5 mm, y = 14.95 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB19 Part No. 243-5719-2/1
for PCB thicknesses of 4.0–4.8 mm, x = 3.7 mm, y = 14.15 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB19 Part No. 243-5719-3/1
for PCB thickness > 4.8 mm, x = 2.9 mm, y = 13.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB19 Part No. 243-5719-4/1
for PCB thicknesses of 2.4–3.2 mm, x = 4.9 mm, y = 15.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB19 Part No. 243-5719-5/1
for PCB thickness < 2.4 mm, x = 6.3 mm, y = 16.75 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB22 Part No. 243-5722-1/1
for PCB thicknesses of 3.2–4.0 mm, x = 4.5 mm, y = 14.95 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB22 Part No. 243-5722-2/1
for PCB thicknesses of 4.0–4.8 mm, x = 3.7 mm, y = 14.15 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB22 Part No. 243-5722-3/1
for PCB thickness > 4.8 mm, x = 2.9 mm, y = 13.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB22 Part No. 243-5722-4/1
for PCB thicknesses of 2.4–3.2 mm, x = 4.9 mm, y = 15.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB22 Part No. 243-5722-5/1
for PCB thickness < 2.4 mm, x = 6.3 mm, y = 16.75 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB25 Part No. 243-5725-1/1
for PCB thicknesses of 3.2–4.0 mm, x = 4.5 mm, y = 14.95 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB25 Part No. 243-5725-2/1
for PCB thicknesses of 4.0–4.8 mm, x = 3.7 mm, y = 14.15 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB25 Part No. 243-5725-3/1
for PCB thickness > 4.8 mm, x = 2.9 mm, y = 13.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB25 Part No. 243-5725-4/1
for PCB thicknesses of 2.4–3.2 mm, x = 4.9 mm, y = 15.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud AB25 Part No. 243-5725-5/1
for PCB thickness < 2.4 mm, x = 6.3 mm, y = 16.75 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B25 Part No. 243-5625-1/1
for PCB thicknesses of 3.2–4.0 mm, x = 4.5 mm, y = 14.95 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B25 Part No. 243-5625-2/1
for PCB thicknesses of 4.0–4.8 mm, x = 3.7 mm, y = 14.15 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B25 Part No. 243-5625-3/1
for PCB thickness > 4.8 mm, x = 2.9 mm, y = 13.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B25 Part No. 243-5625-4/1
for PCB thicknesses of 2.4–3.2 mm, x = 4.9 mm, y = 15.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B25 Part No. 243-5625-5/1
for PCB thickness < 2.4 mm, x = 6.3 mm, y = 16.75 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B19 Part No. 243-5619-1/1
for PCB thicknesses of 3.2–4.0 mm, x = 4.5 mm, y = 14.95 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B19 Part No. 243-5619-2/1
for PCB thicknesses of 4.0–4.8 mm, x = 3.7 mm, y = 14.15 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B19 Part No. 243-5619-3/1
for PCB thickness > 4.8 mm, x = 2.9 mm, y = 13.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B19 Part No. 243-5619-4/1
for PCB thicknesses of 2.4–3.2 mm, x = 4.9 mm, y = 15.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B19 Part No. 243-5619-5/1
for PCB thickness < 2.4 mm, x = 6.3 mm, y = 16.75 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B22 Part No. 243-5622-1/1
for PCB thicknesses of 3.2–4.0 mm, x = 4.5 mm, y = 14.95 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B22 Part No. 243-5622-2/1
for PCB thicknesses of 4.0–4.8 mm, x = 3.7 mm, y = 14.15 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B22 Part No. 243-5622-3/1
for PCB thickness > 4.8 mm, x = 2.9 mm, y = 13.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B22 Part No. 243-5622-4/1
for PCB thicknesses of 2.4–3.2 mm, x = 4.9 mm, y = 15.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud B22 Part No. 243-5622-5/1
for PCB thickness < 2.4 mm, x = 6.3 mm, y = 16.75 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud C Part No. 243-5511-1/1
for PCB thicknesses of 3.2–4.0 mm, x = 4.5 mm, y = 14.95 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud C Part No. 243-5511-2/1
for PCB thicknesses of 4.0–4.8 mm, x = 3.7 mm, y = 14.15 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud C Part No. 243-5511-3/1
for PCB thickness > 4.8 mm, x = 2.9 mm, y = 13.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud C Part No. 243-5511-4/1
for PCB thicknesses of 2.4–3.2 mm, x = 4.9 mm, y = 15.35 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
hm2.0 Shroud C Part No. 243-5511-5/1
for PCB thickness < 2.4 mm, x = 6.3 mm, y = 16.75 mm, Tested in accordance with IEC 61076-4-101
Perpendicular
Other number of contacts? Other stacking heights? alternative plating? Individual assembly? Lagging contacts?
Features
hm2.0 connectors are used, among other things, in CompactPCI systems. This is a PICMG standard for high-end systems using 19-inch technology with a passive backplane. Thanks to their robust design and data transfer rates of up to 3.125 Gbit/s, they are suitable for demanding requirements regarding performance, robustness, and reliability. The hm2.0 connector is also increasingly being used for industrial applications, as it features a robust mating system and, with a 2 mm pitch, offers high contact density. The connector is available with 5 or 8 signal rows and 12 different pin lengths.
Details at a Glance
Details at a Glance
We manufacture custom-fit, custom connectors tailored to your application.
Request a custom connector now
- Other pin counts
- Other stack heights
- Alternative contact coatings
Request a custom connector now
The IEC 61076-4-101 standard
The ept hm2.0 hard-metric connector series was developed and manufactured in accordance with the international standard IEC 61076-4-101. This ensures users a global standard for connecting printed circuit boards using high-pin-count connectors. Printed circuit boards can be easily swapped from one system to another. Key parameters such as retention, shielding, and coding remain compatible across applications.
ept hm2.0 connectors are designed with a 2 mm metric pitch. These connectors can be easily daisy-chained without interrupting the 2 mm pitch at the interfaces. This pitch arrangement offers advantages, particularly in PCB design, as no space is lost within individual connector modules.
Modules A, D, L, and M are equipped with a multi-function block. This accommodates the coding inserts specified by the standard. Molded guides ensure correct alignment of the male and female connectors relative to each other and prevent twisting before contact is made. The coding inserts are snapped into place or released using a simple insertion and extraction tool.
ept offers four different lengths for the mating side and three lengths for the mating side of the hm2.0 male connectors. The different connector lengths are necessary to ensure that certain signal or ground lines are established or disconnected first when plugging in or removing assemblies. The long connectors (11.25 mm) are primarily required for shield rows z and f.
To facilitate alignment and prevent twisting of the connectors, the insulating bodies are chamfered at the ends. These chamfers ensure precise positioning on the PCB and provide the necessary stability between modules.
To prevent PCB mix-ups, coding of the connectors is essential in a modern bus system. The option for coding is already specified in IEC 61076-4-101. So-called coding inserts can be snapped into place by hand in the multifunction block of connector types A, D, L, and M. The various inserts are color-coded and can therefore be quickly identified visually.
ept hm2.0 connectors are designed with a 2 mm metric pitch. These connectors can be easily daisy-chained without interrupting the 2 mm pitch at the interfaces. This pitch arrangement offers advantages, particularly in PCB design, as no space is lost within individual connector modules.
Modules A, D, L, and M are equipped with a multi-function block. This accommodates the coding inserts specified by the standard. Molded guides ensure correct alignment of the male and female connectors relative to each other and prevent twisting before contact is made. The coding inserts are snapped into place or released using a simple insertion and extraction tool.
ept offers four different lengths for the mating side and three lengths for the mating side of the hm2.0 male connectors. The different connector lengths are necessary to ensure that certain signal or ground lines are established or disconnected first when plugging in or removing assemblies. The long connectors (11.25 mm) are primarily required for shield rows z and f.
To facilitate alignment and prevent twisting of the connectors, the insulating bodies are chamfered at the ends. These chamfers ensure precise positioning on the PCB and provide the necessary stability between modules.
To prevent PCB mix-ups, coding of the connectors is essential in a modern bus system. The option for coding is already specified in IEC 61076-4-101. So-called coding inserts can be snapped into place by hand in the multifunction block of connector types A, D, L, and M. The various inserts are color-coded and can therefore be quickly identified visually.
hm2.0 System Modularity
ept hm2.0 modules offer a number of options for optimizing high contact densities, particularly when combined with coaxial or fiber-optic connections. Using the Type A module, connector assemblies up to any desired
total length can be created in 25-mm increments, starting from a length of 50 mm.
Connectors with a multifunction block (Types A, M, L) are preferably arranged at the beginning of a connector row. Type B modules, on the other hand, are only arranged between other modules.
The 25 mm Type C and N modules are arranged at the end of a connector row due to their reverse polarity protection. Correct module assembly is ensured by the coding inserts in the multifunction block and by Type C and N modules.
total length can be created in 25-mm increments, starting from a length of 50 mm.
Connectors with a multifunction block (Types A, M, L) are preferably arranged at the beginning of a connector row. Type B modules, on the other hand, are only arranged between other modules.
The 25 mm Type C and N modules are arranged at the end of a connector row due to their reverse polarity protection. Correct module assembly is ensured by the coding inserts in the multifunction block and by Type C and N modules.
hm2.0 for high-speed applications
ept's hm2.0 connectors enable high-speed applications. Under the conditions described below, data transfer rates of up to 3.125 Gbit/s have been demonstrated.
- Two pairs of hm2.0 connectors from ept
- Two standard FR4 boards, 1.6 mm thick with a trace length of 115 mm
- One standard FR4 backplane, 4.4 mm thick with a trace length of 400 mm
- Special attention to connection failures, skin effect, and dielectric losses during application design
We would be happy to provide you with further details and relevant technical literature regarding high-speed applications using hm2.0 connectors. Please feel free to contact us.
FAQ: Questions and Answers About hm2.0
What data transfer rates are the hm2.0 connectors suitable for? Can you press-fit components into the same PCB hole on both sides using an hm2.0 backplane system?
What data transfer rates are the hm2.0 connectors suitable for?
The hm2.0 connectors support data transfer rates of up to 3.125 Gbit/s.
Can you press-fit components into the same PCB hole on both sides using an hm2.0 backplane system?
No, unfortunately that’s not possible. However, we’ve found another solution for this. The straight connector strips are also available with long pins. This means that after the insertion process, a shroud is pressed onto the back of the backplane. This allows so-called “rear transition boards” to be connected from the back as well.