backDescriptionTechnical SpecificationsHole SpecificationsAccessoriesProcessingPackagingDownloadsStock Check
PC/104-Plus Female connectors Part No. 264-60303-12
Illustration similar
Parallel
Press-fit
- termination length 12 mm
- 120 contacts
- performance level 3
Technical Specifications
Basics
Specification | PC/104-Plus |
---|---|
Performance Level | 3 |
No. of Contacts | 120 |
Termination Technology | Press-fit |
Termination Length | 12 mm |
Board-to-Board Distance | 15.24 mm & 22 mm |
Operating Temperature Range | -55°C to +125°C |
Material
Insulator Material | PBT glass filled, UL 94 V-0 |
---|---|
Contact Material | Copper alloy |
Mechanical
Pitch | 2.0 mm |
---|---|
Mating Force per Pin | max. 1.5 N |
Separating Force per Pin | min. 0.3 N |
Electrical
Operational Current | max. 1.7 A |
---|---|
Operational Voltage | 100 V |
Contact Resistance | < 20 mΩ |
Clearance and Creepage | min. 0.5 mm |
Insulation Resistance | >106 MΩ |
Approval / Compliance
UL file | E130314 |
---|---|
Environment | RoHS compliant |
Hole Specifications
Material | imm. Sn printed circuit boards |
---|---|
Nominal Hole | Ø 0.85 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 0.85 +0.10 / -0.05 mm |
C Drill Hole | 1.0 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | imm. Sn plating, max. 1.5 µm |
F Annular Ring | min. 0.1 mm |
Material | Ni, Au printed circuit boards |
---|---|
Nominal Hole | Ø 0.85 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 0.85 +0.10 / -0.05 mm |
C Drill Hole | 1.0 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | Ni, Au plating, 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni |
F Annular Ring | min. 0.1 mm |
Material | pure Cu printed circuit boards |
---|---|
Nominal Hole | Ø 0.85 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 0.85 +0.10 / -0.05 mm |
C Drill Hole | 1.0 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | OSP*, z.B. GLICOAT-SMD (F2) with 0.12 - 0.15 µm |
F Annular Ring | min. 0.1 mm |
Material | HAL Sn printed circuit boards |
---|---|
Nominal Hole | Ø 0.85 mm |
A PCB Thickness | min 1.44 mm |
B Plated Hole | Ø 0.85 +0.10 / -0.05 mm |
C Drill Hole | 1.0 ±0.025 mm |
D Cu Plating | min. 25 µm |
E Surface | HAL Sn, 5 - 15 µm |
F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5