Mail
SearchbackDescriptionTechnical SpecificationsDerating DiagramHole SpecificationsAccessoriesModificationsProcessingPackagingDownloadsStock Check
DIN 41612 Female straight, type G Part No. 112-60065
Illustration similar
Perpendicular
Press-fit
Power
Rugged
- Termination length 22 mm
- termination side Sn plated for wire wrap
- 64 contacts
- Press-fit
- performance level 2
Technical Specifications
Basics
| Specification | IEC 60603-2 (DIN 41612) |
|---|---|
| Performance Level | 2 |
| No. of Contacts | 64 |
| Termination Technology | Press-fit |
| Termination Length | 22 mm |
| Operating Temperature Range | -55°C to +125°C |
Material
| Insulator Material | PBT glass filled UL 94 V-0 |
|---|---|
| CTI value IEC 60112 | 200 |
| Contact Material | Copper alloy |
Mechanical
| Pitch | 5.08 x 3.81 mm |
|---|---|
| Mating Force | < 100 N |
| Separating Force per Pin | >0.2 N |
| Durability | 400 mating cycles |
Electrical
| Operational Current | 5.6 A |
|---|---|
| Contact Resistance | <15 mΩ |
| Clearance and Creepage | cr: ≥ 3.0 mm, cl: ≥ 1.6 mm |
| Insulation Resistance | >106 MΩ |
| Test Voltage | 1550 V |
Approval / Compliance
| UL file | E130314 |
|---|---|
| Environment | RoHS compliant |
Derating Diagram
Hole Specifications
| Material | imm. Sn printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 1.44 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | imm. Sn plating, max. 1.5 µm |
| F Annular Ring | min. 0.1 mm |
| Material | Ni, Au printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 1.44 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | Ni, Au plating, 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni |
| F Annular Ring | min. 0.1 mm |
| Material | pure Cu printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 1.44 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | OSP*, z.B. GLICOAT-SMD (F2) with 0.12 - 0.15 µm |
| F Annular Ring | min. 0.1 mm |
| Material | HAL Sn printed circuit boards |
|---|---|
| Nominal Hole | Ø 1.6 mm |
| A PCB Thickness | min 1.44 mm |
| B Plated Hole | Ø 1.6 +0.09 / -0.06 mm |
| C Drill Hole | 1.75 ±0.025 mm |
| D Cu Plating | min. 25 µm |
| E Surface | HAL Sn, 5 - 15 µm |
| F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5
Accessories
DIN 41612 Coding type D, E, F and G
Part Number 106-10001
Modifications
Available on request
- Without flange
- Special contact length
- Performance levels I + III or customer-specific
- Contact arrangement
Processing
Packaging
Box
14 pcs / Box
10 Box / Box