One27 Female IDC Part No. 404-59012-61
Illustration similar
Cable-to-Board
High Density
Rugged
- 12 pins
- for IDC-connection with ribbon cable AWG 30/7
- pitch ribbon cable 0.635 mm
- pitch connector 1.27 mm
- Performance level 1
- The female IDC is designed to be used for cable assembly. Observe the recommendations for processing.
Drawings
Further Information
- Product Data Sheet
- ept One27 IDC Installation Instructions
- Information about One27 SMT connectors
- ECAD, MCAD model
Delivery time
Technical Specifications
Basics
No. of Contacts | 12 |
---|---|
Termination Technology | SMT |
Operating Temperature Range | -55°C to + 125°C (depending on used cable type) |
Material
Insulator Material | LCP, UL 94 V-0 |
---|---|
CTI value IEC 60112 | 175 |
Contact Material | Copper alloy |
Plating | Au over PdNi over Ni |
Termination area | Sn over Ni |
Mechanical
Pitch | 1.27 mm |
---|---|
Mating Force per Pin | ≤ 0.5 N |
Separating Force per Pin | ≥ 0.1 N |
Durability IEC 60512-9-1 | Performance level 1: 500 mating cycles |
Vibration, sinusoidal IEC 60512-6-4 | 10 - 2000 Hz, 20g |
Contact mating problems if vibrations occur, sinusoidal IEC 60512-2-5 | ≤ 1 µs |
Shock, semi-sinusoidal IEC 60512-6-3 | 50g, 11 ms |
Contact mating problems if shock occur, semi-sinusoidal IEC 60512-2-5 | ≤ 1 µs |
Electrical
Contact Resistance IEC 60512-2-1 | ≤ 25 mΩ Female --> Male ≤ 10 mΩ IDC --> Cable |
---|---|
Clearance and Creepage | min. 0.4 mm |
Insulation Resistance IEC 60512-3-1 | ≥ 10 GΩ |
Test Voltage IEC 60512-4-1 | 500 VAC |
Approval / Compliance
UL file | E130314 |
---|---|
Environment | RoHS compliant |
Matching Products
Modifications
Available on request
- different number of pins
- other performance level
Packaging
Tray